Mad Professor Silver Spring Reverb Effect Pedal

Description

Mad Professor Silver Spring Reverb Effect Pedal

SilverSpring Reverb (SSR) is a compact, easy to use digital/analog reverb with a pureanalog direct signal path. It creates a natural sounding ambient reverb thatwill not get in the way of your original signal.

The SilverSpring Reverb’s bandwidth is in between the dark warmth of an amplifier’s springreverb and the pristine clarity of a studio reverb.
There is nonoise reduction system, in order to keep the decay as natural as possible.
The directsignal path is all analog, going straight through analog amplifiers with nofiltering.
With theinput set below the maximum, there is no signal distortion or coloration
The Reverbsignal path is filtered to produce the Silver Spring Reverb’s natural ambiance.
The SSR’ssound is exceptional with a clean signal but was specifically designed to workequally well with the tougher performance requirements of distorted tone. TheSSR can be used before distortion, although it was primarily designed to goafter. If you use the SSR before distortion, you may want to use a lower Reverb(Wet/Dry) setting.

Built the MadProfessor way: small footprint and big tone. Complete true bypass and input ofcircuit grounded in bypass.

TechnicalSpecifications

CONTROLS
TIME: Thissets the decay time of reverb. Turn it clockwise for longer decay. At the fullcounterclockwise position, the decay is that of a small room. At the fullclockwise position, the decay resembles the large hall sound of a plate reverb.Around the center setting the medium decay time is optimal for rhythmic chordsand single notes.
TONE: Thisadjusts the bandwidth of the reverb signal. Turning clockwise results in abrighter reverb tone and counter-clockwise darker one. Fully counter-clockwiseapproximates the response of a typical spring reverb, clockwise a studioreverb.
REVERB: Thisadds reverb to dry signal. Reverb can be turned fully off if Reverb knob isturned fully CCW, and is loudest at fully clockwise.
ELECTRICAL SPECIFICATIONS
Currentconsumption: 80mA at 9VDC (adapter recommended)
Voltagerange: 6-9 V, 9 V 100mA preferred
Inputimpedance: 500K
Output drivecapability: 10K Ohms
Signal noiseratio: 90dB